Common Problems for Laser Cutting Machine and How to Adjust

A laser head and the laser emits

(a) Laser tube have no laser emits, check whether the laser there is no power supply, if not give laser for power; to see the laser tube aging or damaged, if it is necessary to replace the laser tube; if the laser power supply equipment damaged , replace the power supply equipment.

(b) If the deflection of the mirror in the laser path and the lens, users need to adjust the optical path.

(2) Cutting / engraving depth is not enough

If the laser output power is too low, the user should increase the output power through the control panelIf the cutting / engraving speed is too fast, the user should adjust the software to reduce cutting / engraving speed. If the focal point is not in the correct position, the user should be adjusted. If the laser tube aging, the user should increase the laser power or replace the laser tube. If the laser power supply is not adequate, the user should adjust or replace the laser power. Machines will not work after 3. Typesetting. If the control system is not connected to the power supply, the users who manipulate the machine need to turn off the switch and with the data cable connection.

(b) If the data line between the computer and the laser cutting machine is not connected well, host switch off, connect the data cable.

(4) The process of carving and cutting overhead lines

If the communication line is a problem, replace the lines of communication.

If the laser machine and the computer are not placed on the ground, the user should the laser machine and the computer placed on the ground.

If the application software, the user should be re-placed the software and reinstall the driver software.