Laser Machine

Laser Machine Group

YM3024 Automatic High-Power Laser Flat Bed

YM3024 Automatic High-Power Laser Flat Bed is a tailored and professional product for rolled fabrics cutting in the industries of special fabrics processing; inner decoration processing for auto, avigation and navigation equipments; outdoors and sports goods cutting. Stable machine body and agile performance and software special for laser cutting which enable you to accomplish the machining with ease, whose efficiency and quality are far beyond the traditional cutting. Furthermore it can work 24 hours non-stop and greatly meet the working demands. YM3024 Automatic High-Power Laser Flat Bed is matched with YueMing YMF-1800W high power CO2 axis laser generator.

Features:

◆YueMing Laser has introduced a bran-new and wonderful model YM-3024 automatic high-power laser flat bed for special fabrics processing; inner decoration processing for auto, avigation and navigation equipments; outdoors and sports articles cutting. This model is good for massive production of rolled fabrics cutting.
◆YM-3024 Automatic High-Power Laser Flat Bed is a tailored and professional product for rolled fabrics cutting in the industries of special fabrics processing; inner decoration processing for auto, avigation and navigation equipments; outdoors and sports goods cutting. Stable machine body and agile performance and software special for laser cutting which enable you to accomplish the machining with ease, whose efficiency and quality are far beyond the traditional cutting. Furthermore it can work 24 hours non-stop and greatly meet the working demands.
◆YM-3024 Automatic High-Power Laser Flat Bed is matched with YueMing YMF-1800W high power CO2 axis laser generator, which can greatly increase the production efficiency and ensure the high-quality cutting edges at the same time.
◆So lots of products, among which there must be one tailored products special for you. We are laser processing application expert just by your side, your career partner and your friend.

Technical Parameters:

Matched laser generator and its power: YMF-1800W YMF-2400W YMF-3000W ( optional)
Cutting area ( X,Y): 2400MMX3000MM ( one pass)
Repeatability: ±0.15mm
Fast Cutting Precision: ±0.3mm
Maxim feeding speed: 12m/min
Fast cutting speed: 30m/min
Cutting flat bed: automatic trail feeding system
Material clamp:
Electricity: 3 phase 380V,15KVA( whole units, depends on the laser power)

Uniqueness:

Laser processing advantages:

1.High precision

When cutting by laser ,the materials are cut under natural situation without being pressed, therefore, no distortion will be caused and precision ensured.

2.Any kind of curve line is workable

Laser processing totally goes beyond the restriction in curve line cutting by the traditional method and can fulfill cutting for any design. Therefore, it offers a limitless space for the designer and enrich the products' looks.

3.Automatic sealing

Laser processing can seal the fabrics cutting edge and increase the quality and reliability.

4.material saving

Mechanical processing leads to material waste due to the crafts restriction:

a)The additional processing area to the design should be left due to the minimum curve cutting restriction, therefore leads to the material waste.

b)The starting point of the knife have to be chosen and the knife moving track should be planned specially which lead to the circumstance material waste.

c)Knife cutting needs high pressure in the processing, therefore the distance should be left between different designs which is also a kind of waste.

d)Before knife cutting, the rolled material should be cut which leads to useless leftovers.

e)Before knife cutting, the materials should be fastened, and other assisting materials may be needed.

f)The cutting sized should be enlarged a little because of the weaving and material wasted is caused.

While laser cutting does not have before-mentioned disadvantages and can save up to 10% materials. For the massive production manufacturer, the saving cost may be more than the machine cost.

The advantages of the laser cutting are as followings:

a) Any size and any curve are processable.

b) Any point can be as the starting point.

c) Laser cutting does not need outer pressure therefore no distance between the designs.

d) No need to cut the roll material before working and can arrange the designs tightly on the material and greatly decrease the waste.

e) Assisting materials are not needed so can decrease the cost.

f) The automatic sealing is a great advantage of laser cutting. It can control the design size with high precision.

Model Characteristics:

Precision digital control machine includes high rigidity framework body featuring good rigidity, stability and dynamic performance.

Imported Servo motor, linear motion guide are adopted featuring good performance, quick reaction, free of maintenance, precise positioning and fast speed.

High power CO2 laser generator is adopted which is for all kinds of rolled fabrics processing. The laser quality is stable and reliable which can meet the restrict demands.

The steel structure foundation, which is after 9 months quenching, the natural aging, the article aging, the vibration effectiveness and other treatment can ensure the structure stability and reliability.

Automatic trailing feeding system enables the pressure-free extending and flattening of the materials, the cutting edges can perfectly guide in line. And make good use of the materials.

Optical lens from America 26 are adopted.

Digital control system and industrial inserted computer are adopted which can both controlled by computer and LCD.

MECHATOROLINK-2 high-speed net control on the spot is stable and reliable.

DXF files are readable and it enjoys software compatibility and operation.

The customers can choose the material extending device according to their own needs to ensure multiple materials cutting.

The customers can choose the slant belt transporting system to connect the production line with the products.

Vacuum sweeper can protect the operation environment.